Does fire patrol inspection cabinet need fire 3C?
Date： 2021-10-25
At present, there are different opinions on whether the fire inspection cabinet needs the compulsory product certification of the Ministry of Public Security (also known as fire 3C certification), and there has been no authoritative explanation. Among them, there are some manufacturers fishing in troubled waters. We consult with the Ministry of public security, the national fire electronic product quality supervision and inspection center and the National Accreditation Commission; Referring to the fire protection law of the people's Republic of China (Order No. 6 of the president) and the catalogue of fire protection products with compulsory product certification, it is concluded that the production and manufacturing of fire inspection cabinet must meet the standards of gb16806-2006 and GB / T19001-2008 and must pass the inspection of the National Fire electronic product quality supervision and inspection center, And obtained the compulsory certification certificate of fire protection products issued by the Ministry of public security and the Accreditation Commission.
The following is a summary of relevant regulations:
Fire control law of the people's Republic of China (Order No. 6 of the president)
Article 24:
Fire fighting products must comply with national standards; If there is no national standard, it must comply with the industrial standard. It is prohibited to produce, sell or use unqualified fire-fighting products and fire-fighting products explicitly eliminated by the state.
Fire protection products subject to compulsory product certification according to law can be produced, sold and used only after being certified as qualified by a legally qualified certification institution in accordance with the mandatory requirements of national standards and industrial standards. The catalogue of fire protection products subject to compulsory product certification shall be formulated and published by the product quality supervision department of the State Council in conjunction with the Public Security Department of the State Council.
Catalogue of fire protection products for compulsory product certification:
4 fire linkage control system in principle, each model of fire linkage control system is divided into an application unit, but for the classified products that meet the following conditions, their classified products can be used as an application unit with their main products:
1) Different matching loads (quantity, power and characteristics) and different mechanical dimensions and power supply capacity;
2) The number of output (alarm output or control output) circuits is different and the resulting mechanical size and power capacity are different;
3) The layout design of the panel is different;
4) Different software due to different number of connected circuits.
5) Different installation methods.
6) Other minor differences that will not affect product performance. GB16806-2006
Our fire inspection cabinet belongs to: fire linkage control system, which is applicable to gb16806-2006 standard.
It can be inferred that the fire inspection cabinet needs 3C certification of fire products issued by the Ministry of public security.
Home
Tel
Online
Contact